Can the high-efficiency thread mill A...

Can the high-efficiency thread mill AT-2 R-SPEC with non-ferrous end cutting edge be used without cutting oil? Basically, water-soluble cutting oil is recom... 詳細表示

Unlike other thread mills, the AT-2 h...

The AT-2, a thread mill with end cutting edge for high-hardness steel, is a left-hand blade specification (= used with left-hand rotation of the tool). ... 詳細表示

Can AT-2 be reground？

AT-2 cannot be reground. 詳細表示

Can AT-2 R-SPEC be reground? High ef...

AT-2 R-SPEC cannot be reground . 詳細表示

What are the features of the AT-1? "T...

The AT-1 uses a right-hand cut and a left-hand helix to prevent tool deflection , evolution from conventional two-pass machining to one-pass machining. The ... 詳細表示

We want to shorten the processing tim...

We want to shorten the processing time of the AT-1 compared to the current situation. When creating a program in ThreadPro, the default cutting conditions f... 詳細表示

Can I grab the AT-1 with the shrink-f...

The shank accuracy of the AT-1 is h6 in the JIS fit tolerance, so the shrink-fitting holder can be used. 詳細表示

Precautions for the use of the high-e...

Since it is a left-hand flute specification, please use it with reverse spindle rotation & down-cut . Please confirm in advance that the bottom of the fin... 詳細表示

What is Thread Mill AT-2 with end cut...

It is a thread mill with end cutting edge for high-hardness steel. Helical drilling and threading can be performed simultaneously. In the threading on hi... 詳細表示

Is it okay to use the same program wh...

Is it okay to use the same program when using a new AT-1 from the conventional product that has been used so far? Since the shape of the tool has changed,... 詳細表示