What is a threaded insert? What is it...

Threaded inserts are coiled threaded bushings that reinforce internal thread such as aluminum or resin. It is sometimes referred to as an insert helisert. In... 詳細表示

What is the difference between an ins...

Both inserts and Ensat are tools that can be used to reinforce internal thread . That is inserted into a screw to improve strength and durability. It is ge... 詳細表示

How to use Insert ・Helissert? Require...

How to use inserts? Required tools and machining procedures A thread insert is a tool in the shape of a coil that can be used to improve the strength of... 詳細表示

What are the different types of threa...

Thread inserts are divided into different types according to application, base material , thread length, insertion method, etc. OSG inserts, insertion tools... 詳細表示

Material diameter of round dies (equi...

From the link below, you can refer to the material diameter of the round die. See what was right for the type of screw. M_ metric threads U_ Unifie... 詳細表示

I want to see the SynchroMaster manual.

I want to see the manual of Synchro Master. You can check the manual that describes how to use the Tap holder "SynchroMaster" for equipment with a synchrono... 詳細表示

I want to order a band saw, how do I ...

There are five pieces of information you need to determine the specifications of a band saw. (Series of Band Saw) (Length) × (Width) × (Thickness) × (Pitch... 詳細表示

What is a Tool Presetter?

A cutting tool rotates at very high speeds during machining. “Preset” means setting in advance. Presetting and measuring cutting tools before machining helps... 詳細表示

What type of power supply does the To...

The Tool Presetter can be configured for either 100V or 200V, which must be selected before purchase. Please note that 500V is not supported. 詳細表示

HAIMER product catalogue <HAIMER >

The following product catalogs handled by OSG are compiled into one catalog. ・ Shrink fit device Power Clamp ・ Origin tool: 3D sensor ・ Centering tool Cen... 詳細表示