What materials are compatible with A ...

What materials are compatible with A Tap ? I want to process SS400, S45C, SUS, FC, but is it possible? SS400, S45C, and SUS are recommended, but only FC is ... 詳細表示

Difference from A Tap and CC-SUS-SFT

Both use variable lead flutes, but unlike CC-SUS, which is mainly a flute type for SUS, A Tap is a versatile flute type Tap that can be adapted to SUS and ca... 詳細表示

What hardness of work material can A-...

The approximate material hardness (HRC) that can be processed by A-SFT AND A-POT is as follows. A-SFT：30HRC A-POT：35HRC References: A Tap Series ... 詳細表示

How deep can S-XPF be drilled?

As with other forming tap , first consider a depth of about 3 times the diameter of the tool. However, it may vary depending on the workpiece material. 詳細表示

Can A-SFT AND A-POT be used in floati...

Can A-SFT AND A-POT be used in floating tupperware? A-SFT AND A-POT are also available in floating tupperware. Please use it at a cutting speed of 15 m/m... 詳細表示

What are the benefits of S-XPF torque...

XPF, which has low torque and low heat generation, can be used for rolling large-diameter, high-hardness materials. It is also effective for high-speed, lon... 詳細表示

A Tap _ Use on machines with synchron...

A Tap can be used on machines with a synchronization function. For speeds exceeding 15 m/min, we recommend using a machine with a synchronous feed mechani... 詳細表示

What is the model number of the A-SFT...

What is the model number of the A-SFT end mill shank specification? There is no special model number, and it remains A-SFT. You can distinguish the... 詳細表示

Is there an insert screw in the A-SFT?

Is there an insert screw in the A-SFT?? There is a product called A-SFT-HL. This is a Tap that processes a screw with a larger outer diameter (same pitch) t... 詳細表示

High efficiency and multi-functionali...

Thanks to the state-of-the-art coating dedicated to Tap and a special thread geometry that suppresses sudden chipping , the A-XPF enables long- tool life and... 詳細表示