Are OSG products RoHS directive? Can ...

For environment-related inquiries and certificate issuance of our products, please contact our sales team via your dealer. 詳細表示

Use of S-XPF in stainless steel

For use on stainless steel, it is recommended to use an insoluble cutting fluid or a water-soluble cutting fluid with highly lubricity. References: Cutting ... 詳細表示

Difference from A Tap and VP-SFT

A-SFT is recommended up to 30HRC. VP-SFT is recommended for harder materials (30~42HRC). References: A Tap Series 詳細表示

Is it possible to support deep hole d...

Is it possible to support deep hole drilling with A-SFT? The A-SFT supports effective thread depths up to 2.5D (2.5 times the outer diameter of the thread).... 詳細表示

Is there an insert screw in the A-SFT?

Is there an insert screw in the A-SFT?? There is a product called A-SFT-HL. This is a Tap that processes a screw with a larger outer diameter (same pitch) t... 詳細表示

What hardness of work material can A-...

The approximate material hardness (HRC) that can be processed by A-SFT AND A-POT is as follows. A-SFT：30HRC A-POT：35HRC References: A Tap Series ... 詳細表示

A Tap _ Use on machines with synchron...

A Tap can be used on machines with a synchronization function. For speeds exceeding 15 m/min, we recommend using a machine with a synchronous feed mechani... 詳細表示

What are the benefits of S-XPF torque...

XPF, which has low torque and low heat generation, can be used for rolling large-diameter, high-hardness materials. It is also effective for high-speed, lon... 詳細表示

Difference from A Tap and CC-SUS-SFT

Both use variable lead flutes, but unlike CC-SUS, which is mainly a flute type for SUS, A Tap is a versatile flute type Tap that can be adapted to SUS and ca... 詳細表示

A Tap , Use in drilling machine

The A-Tap can also be used on manual drilling machines. However, tapping requires one pitch per revolution (for single-start threads). When processing with ... 詳細表示