What is the difference between S-XPF ...

Compared to conventional NRT, the S-XPF is a forming tap that can be processed with lower torque and lower heat generation. It is suitable for high-hardness... 詳細表示

Dry processing in A Tap

Dry processing at A Tap It is okay to use non-water-soluble coolant and water-soluble emulsion type, but we do not recommend water-soluble coolant with poor... 詳細表示

Difference from A Tap and V-SFT

A-Tap and V-SFT have the same V-coating, but the two taps differ in their base materials and flute specifications. The corresponding workpiece materials are... 詳細表示

What is the guideline for correction ...

Reduce the number of speed (min-1) to 60%. The feed per revolution (mm/rev) does not need to be changed as long as it is within the catalog range. 詳細表示

Is it possible to process half-hole?　...

Half-Hole is possible. However, it is necessary to adjust the cutting conditions. Reference: Processing half-hole 詳細表示

Centering of a long shank flat drill ...

For long-shank flat drills with long overhang lengths, such as ADFLS-2D, we recommended centering to reduce runout when the drill engages the hole. The guid... 詳細表示

How should flat drills and a drill wi...

Applications Where flat drills are advantageous Drilling in the inclined surface (at the entrance and pull out) Drilling holes on surfaces with uneven su... 詳細表示

What is A Tap ? What are its features...

A Tap is a Tap that realizes stable thread processing with its strength of "outstanding chip ejection performance" in a wide range of workpiece materials and... 詳細表示

What is the good DUROREY coating appl...

What is the good DUROREY coating applied to end mills for high-hardness steel? The DUROREY coating consists of an ultra-heat-resistant layer containing SiC ... 詳細表示

Precautions for the use of the high-e...

Since it is a left-hand flute specification, please use it with reverse spindle rotation & down-cut . Please confirm in advance that the bottom of the fin... 詳細表示