• Text Size
  • S
  • M
  • L
  • TOP > A brand

Search

Keyword or Sentence(200characters) 
(example)
Search for both A and B : A (space) B
Search for either A or B : A|B
Search for A excluding B : A-B

Category: A brand

Results:127 ,Showing: 31 - 40

≪ 4 / 13Page ≫

  • What are the features of the ADO-SUS ...

    With a larger oil hole shape, the flow velocity of the cutting oil is about 2 times higher and the flow rate is increased by about 1.3 times. This allows fo... 詳細表示

    • No：17904
    • Publication Date：2025/09/05 11:11
    • Updated Date：2025/11/10 16:47
    • Category： A drill

  • Can I use ADO-SUS drills with drillin...

    We don't recommend it. Since it is used in a high cutting conditions range, it is necessary to grip the tool with high precision and rigidity, and to hold th... 詳細表示

    • No：17892
    • Publication Date：2025/09/05 11:11
    • Updated Date：2025/11/20 16:55
    • Category： A drill

  • Is there an insert screw in the A-SFT?

    Is there an insert screw in the A-SFT?? There is a product called A-SFT-HL. This is a Tap that processes a screw with a larger outer diameter (same pitch) t... 詳細表示

    • No：17854
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/01/23 15:22
    • Category： A-Tap

  • Difference from A Tap and V-SFT

    A-Tap and V-SFT have the same V-coating, but the two taps differ in their base materials and flute specifications. The corresponding workpiece materials are... 詳細表示

    • No：17843
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/01/23 14:41
    • Category： A-Tap

  • What is S-XPF?

    S-XPF is a forming tap that reduces processing torque and heat generation, and enables rolling of high-hardness materials up to 35 HRC. With a rich lineup f... 詳細表示

    • No：17819
    • Publication Date：2025/09/05 11:11
    • Updated Date：2025/11/18 14:51
    • Category： A-Tap

  • When using AE-VTSS for plunge cutting...

    Since this end mill has a relief angle, plunge cutting alone will not produce a flat bottom surface. However, if you follow up with lateral cutting or simil... 詳細表示

    • No：18162
    • Publication Date：2025/09/05 11:11
    • Updated Date：2025/12/08 16:02
    • Category： A end mill

  • AE-VTSS is described as “designed for...

    Although AE-VTSS is designed for automatic lathes, it can also be used on machining centers and NC milling machines. Its short cutting length provides high ... 詳細表示

    • No：18161
    • Publication Date：2025/09/05 11:11
    • Updated Date：2025/12/08 15:40
    • Category： A end mill

  • Can AE-CPR4-H be reground? 4-flute lo...

    Regrinding of AE-CPR4-H is not supported. 詳細表示

    • No：18159
    • Publication Date：2025/09/05 11:11
    • Updated Date：2025/12/08 14:56
    • Category： A end mill

  • Is it okay to use the same program wh...

    Is it okay to use the same program when using a new AT-1 from the conventional product that has been used so far? Since the shape of the tool has changed,... 詳細表示

    • No：17963
    • Publication Date：2025/09/05 11:11
    • Updated Date：2025/09/29 10:54
    • Category： A-thread mill

  • Can the high-efficiency thread mill A...

    Can the high-efficiency thread mill AT-2 R-SPEC with non-ferrous end cutting edge be used without cutting oil? Basically, water-soluble cutting oil is recom... 詳細表示

    • No：18118
    • Publication Date：2025/09/05 11:11
    • Updated Date：2025/09/16 16:29
    • Category： A-thread mill

Results:127 ,Showing: 31 - 40

TOP