Can screw fit type cutters such as PS...

Can screw fit type cutters such as PSE SF and PRC SF be used with holders from other manufacturers with the same thread size? It is not recommended to use... 詳細表示

indexable counterboring tool PZAG

indexable counterboring tool PZAG PZAG is an indexable counterboring machining tool from the indexable tool brand OSG PHOENIX. ・ counterboring Cu... 詳細表示

Precautions for centering in PLDS

One thing to keep in mind when centering PLDS is that the centering diameter should be smaller than the drill diameter. If the centering diameter is large... 詳細表示

What is the PSE Type for Automatic La...

It is a variant of the PSE series of indexable shoulder milling cutters, specifically designed for optimal performance on automatic lathes. Key features inc... 詳細表示

Are the holes in the holder and inser...

Actually, this is normal. This misalignment is not abnormal, as it is a clamping fee to make the insert adhere to the holder by tightening the screw. For... 詳細表示

What is the PXM Head-Exchangeable End...

The PXM head-exchangeable end mill consists of a carbide cutting head and a dedicated PXM holder. Compared to solid carbide tools, only the head needs to be... 詳細表示

Selection of arbors for indexable tools

I would like to select an arbor that is compatible with the OSG Phoenix series of indexable tools. Which points should I check? (1) First, check whether t... 詳細表示

Multi-function cutter Insert for PMD

Are PMD inserts dedicated inserts? PMD inserts are not dedicated inserts. When using a PMD, drilling and plunging edge insert and a peripheral cutting ed... 詳細表示

Does the PMD insert mounting wrench c...

The OSG PHOENIX series indexable cutter is sold separately with a wrench. Since PMD uses two types of inserts, two types of wrenches are required.　 per... 詳細表示

What is a Wiper Insert for High-Preci...

A wiper insert is designed with a longer secondary cutting edge compared to a standard insert and is mounted so that it protrudes slightly more than the othe... 詳細表示