Multifunctional Cutter Series PMD

Multifunctional Cutter Series PMD It is a multifunctional cutter of the Phoenix brand indexable type. With a single machine, continuous processing can be pe... 詳細表示

What is PXMC Ultra-Short Collet Extra...

PXMC is a collet that can be directly attached to the head part of the PXM series. What is an interchangeable head end mill PXM? The protruding length can ... 詳細表示

What is PFDC? OSG Phoenix Indexable Tool

What is PFDC? OSG Phoenix Indexable Tool PFDC is a lightweight, large-diameter disc cutter that can be mounted on small machining centers. The body alone... 詳細表示

6 Corners shoulder milling What is Cu...

6 Corners shoulder milling What is the Cutter Series PSTW? Compared to common shoulder milling cutters (1) Large number of corners used (= 6 corners can be... 詳細表示

Precautions for centering in PLDS

One thing to keep in mind when centering PLDS is that the centering diameter should be smaller than the drill diameter. If the centering diameter is large... 詳細表示

Accuracy of inserts in indexable tools

The accuracy of the insert can be checked by the third alphabet of the insert's model number. < accuracy classification > Grade symbol Classificatio... 詳細表示

The color of the inserts in the OSG P...

The color of the inserts in the OSG Phoenix series of indexable tools is different from before. Missent with other coatings? The surface color of the XP30... 詳細表示

PFDC Mounting Part Dimension Table φ8...

PFDC Mounting Part Dimension Table φ80 φ100 φ125 Disc Cutter This is a dimensional drawing of the PFDC mounting part. Please refer to it when selecting a... 詳細表示

Is it possible to undercut with PFB?

PFB-Q and PFB-Q-ST inserts can be undercut by selection. All of them have a spherical effective cutting edge range of ~220°, which avoids the risk of inter... 詳細表示

6 Corners shoulder milling Applicatio...

Applications of 6 Corner shoulder milling Cutter Series PSTW PSTW is suitable for machining with long overhangs that are prone to vibration and processing t... 詳細表示