What is a power screw specification?
What is a power screw specification?? It is a double-headed screw that connects the cutter and arbor. The cap screw for general cutters is screwed and fixe... 詳細表示
Precautions for the use of PDZ inserts
Precautions for using PDZ inserts include: Diamond-shaped inserts, ZPNT, are used, but when installed, two different corners of the four cutting edges are... 詳細表示
exchangeable head end mill for high-...
Depending on the extent of the damage, regrinding is generally possible. Recoating is also recommended to ensure performance. OSG also offers drill regrind... 詳細表示
What is Ball End Mill PFB for Indexab...
PFB is an indexable type ball end mill for finishing. The insert has a high ball-radius accuracy of ± 6 μm and a sharp spiral cutting edge shape for a good ... 詳細表示
Refers to a shoulder milling cutter with a cutting edge angle of 90°. It is used when you want to use the edge of the cutting edge to cut the machined part ... 詳細表示
What are wiper inserts? Aiming for hi...
Wiper inserts have a longer secondary cutting edge than general inserts, and have a structure that protrudes slightly more than other cutting edges during in... 詳細表示
If PSF steel inserts are attached to ...
If PSF steel inserts are attached to the PFDC body, can they be used for steel processing? The PFDC insert can be installed with a 4... 詳細表示
What is an interchangeable head end m...
PXM exchangeable head end mill consists of a carbide head section and a dedicated holder for the PXM. Compared to solid carbide tools, only the head can be ... 詳細表示
What is the range of HRC hardness for...
It is a good rule of thumb up to around ~65HRC. 詳細表示
Does the PMD insert mounting wrench c...
The OSG PHOENIX series indexable cutter is sold separately with a wrench. Since PMD uses two types of inserts, two types of wrenches are required. per... 詳細表示
Results:30 ,Showing: 11 - 20