Eco-Cut Can it be used in tool rotati...

We do not recommend it. Since the tool was originally intended for lathe machining, it cannot be used in tool rotation at a machining center. 詳細表示

Are there any eco-cuts with a small d...

In the Eco Cut series, the Eco Cut Mini that can be made more small diameter is now available. References: small diameter High Efficiency minor diameter Pro... 詳細表示

What is a power screw specification?

What is a power screw specification?? It is a double-headed screw that connects the cutter and arbor. The cap screw for general cutters is screwed and fixe... 詳細表示

Selection of arbors for indexable tools

I would like to select an arbor that is compatible with the OSG Phoenix series of indexable tools. Which points should I check? (1) First, check whether t... 詳細表示

Can screw fit type cutters such as PS...

Can screw fit type cutters such as PSE SF and PRC SF be used with holders from other manufacturers with the same thread size? It is not recommended to use... 詳細表示

indexable counterboring tool PZAG

indexable counterboring tool PZAG PZAG is an indexable counterboring machining tool from the indexable tool brand OSG PHOENIX. ・ counterboring Cu... 詳細表示

What is PLDS?

What is PLDS? It is an indexable type spotting drill that can perform centering, chamfering, and V slotting, which was difficult to consolidate with the sol... 詳細表示

Precautions for centering in PLDS

One thing to keep in mind when centering PLDS is that the centering diameter should be smaller than the drill diameter. If the centering diameter is large... 詳細表示

6 Corners shoulder milling What is Cu...

6 Corners shoulder milling What is the Cutter Series PSTW? Compared to common shoulder milling cutters (1) Large number of corners used (= 6 corners can be... 詳細表示

Applications of the PSTW 6‑corner sho...

PSTW is suitable for machining with long overhangs that are prone to chattering and processing that requires higher efficiency. In addition, PSE (rectangula... 詳細表示