Eco-Cut Can it be used in tool rotati...
We do not recommend it. Since the tool was originally intended for lathe machining, it cannot be used in tool rotation at a machining center. 詳細表示
Can screw fit type cutters such as PS...
Can screw fit type cutters such as PSE SF and PRC SF be used with holders from other manufacturers with the same thread size? It is not recommended to use... 詳細表示
indexable counterboring tool PZAG
indexable counterboring tool PZAG PZAG is an indexable counterboring machining tool from the indexable tool brand OSG PHOENIX. ・ counterboring Cu... 詳細表示
Precautions for centering in PLDS
One thing to keep in mind when centering PLDS is that the centering diameter should be smaller than the drill diameter. If the centering diameter is large... 詳細表示
Cutting conditions of the Eco-Cut ser...
・Eco-Cut Classic cutting condition table Cutting conditions during drilling Cutting conditions during turning ・Eco Cut Mini Cutting conditions of Eco Cut... 詳細表示
What is the PSE Type for Automatic La...
It is a variant of the PSE series of indexable shoulder milling cutters, specifically designed for optimal performance on automatic lathes. Key features inc... 詳細表示
What are the features of the Eco Cut ...
With conventional tools such as boring bars, the smaller the diameter, the lower the tool rigidity, making it difficult to perform high-efficiency machining.... 詳細表示
What is the multifunctional turning tool Eco-Cut? Eco-Cut is a multifunctional turning tool that allows you to perform the following machining with a sing... 詳細表示
Are the holes in the holder and inser...
Actually, this is normal. This misalignment is not abnormal, as it is a clamping fee to make the insert adhere to the holder by tightening the screw. For... 詳細表示
What is the PXM Head-Exchangeable End...
The PXM head-exchangeable end mill consists of a carbide cutting head and a dedicated PXM holder. Compared to solid carbide tools, only the head needs to be... 詳細表示
Results:42 ,Showing: 1 - 10