How can I get a quote for HAIMER prod...
For a quote for the following HAIMER products, please contact the OSG sales office through a trading company. < shrink fit machine Power Clamp> < ... 詳細表示
Can the protruding length of the tool...
There are several ways to do this. Attach the clip to the shank of the tool. Use a model with height gauge (Power Clamp Preset NG) Use a quick‑set tool to... 詳細表示
A cutting tool rotates at very high speeds during machining. “Preset” means setting in advance. Presetting and measuring cutting tools before machining helps... 詳細表示
The air pressure of the tool presetter is from 0.5 to 0.6 MPa. 詳細表示
Does the tool presetter support hold...
The tool presetter supports holders with IC chip only for the OZT-3 made by each company. Balluff, Omron, BIG, etc. 詳細表示
Why can the Power Clamp shrink-fit sy...
Because the material of HSS tools is similar to that of shrink-fit holders, their thermal expansion rates are close. Traditionally, when removing the tool, ... 詳細表示
The Power Clamp Nano is horizontal, b...
Since it is horizontal type, there is no risk of the removed tool falling. Also, if you want to shorten the overhang length , it has the advantage of being e... 詳細表示
Is it possible to modify existing too...
Yes, but only for our own tools. Please contact our sales department for details. 詳細表示
Disadvantages of camera type <tool pr...
Dislikes light. Do not allow direct exposure to sunlight, spotlights, etc. 詳細表示
Are there any tools that can process ...
We offer PCD tools for machining hard and brittle materials. High-efficiency machining tools for hard and brittle materials In general, these materia... 詳細表示
Results:65 ,Showing: 21 - 30