What is the difference between Synchr...
There are two types of SynchroMaster collets: GH type and GHC type, and there are differences in the corresponding refueling methods for each. Please use it ... 詳細表示
Using the mouse and keyboard < tool p...
The model number of the tool presetter OZT-3 can be used as long as the mouse and keyboard input terminal are USB type.And the same goes for OZT-2. 詳細表示
The Power Clamp Nano is horizontal, b...
Since it is horizontal type, there is no risk of the removed tool falling. Also, if you want to shorten the overhang length , it has the advantage of being e... 詳細表示
The air pressure of the tool presetter is from 0.5 to 0.6 MPa. 詳細表示
What is the runout accuracy of HAIMER...
All models offer a runout accuracy of ≤ 3 µm (measured at 3D). 詳細表示
In what types of machining is Safe-Lo...
It helps prevent chatter and tool pull-out during high-feed machining or heavy cutting, ensuring stable and reliable operations. 詳細表示
What types of holders are available w...
There are shrink-fit holders and collet holders. However, collet holders are only available for diameters up to 20 mm. 詳細表示
Is it possible to calibrate the manuf...
I can. Please contact us for more information. 詳細表示
How strong is the vacuum clamping on ...
The air pressure is set so that it can be released by hand. 詳細表示
What holder types are supported by th...
The Tool Presetter supports BT30, BT40, BT50, HSK40, and HSK63 holders. Other lathe holders are also supported. Please contact your sales representative for... 詳細表示
Results:65 ,Showing: 11 - 20