• Text Size
  • S
  • M
  • L

Search

Keyword or Sentence(200characters) 
(example)
Search for both A and B : A (space) B
Search for either A or B : A|B
Search for A excluding B : A-B

Category: General

Results:25 ,Showing: 1 - 10

≪ 1 / 3Page ≫

  • How to machine oversized threads with...

    Oversize refers to threads that are larger than the typical thread accuracy. There are various reasons for making large screws, such as plating on internal t... 詳細表示

    • No：18203
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/04/08 10:33

  • What is RPRG? What is the tool diamet...

    RPRG stands for tool radius correction value, which is a number used to tell the machine, "What is the radius of the tool?" The machine tool calculates the ... 詳細表示

    • No：17639
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/04/09 13:18

  • <Thread mill> Is it possible to rewor...

    Since the phase of the screw to be processed is shifted, once the workpiece is removed, it cannot be processed again. When adjusting the finish of the scr... 詳細表示

    • No：18204
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/04/08 10:27

  • The procedure for machining the left ...

    By changing the movement of the tool, the thread mill can machine both right and left threads with the same tool. The procedure for machining the left hand t... 詳細表示

    • No：18180
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/04/08 10:35

  • A thread mill with an exchangeable cu...

    Make sure that the insert is not upside down. For tapered screws for pipes, there is a tapered on the insert side. Therefore, if the insert is installed on... 詳細表示

    • No：17644
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/04/08 11:20

  • I am machining RC internal thread , b...

    The direction of the insert attached to the holder may be reversed. Make sure the insert surface is "R" instead of "L". Holders with "LH" at the end of the... 詳細表示

    • No：17643
    • Publication Date：2025/09/05 11:11
    • Updated Date：2025/09/10 13:28

  • I want to pass with a screw gauge . W...

    If you select "Cutting Edge Reference" when creating a program with ThreadPro, a program creation app for thread mills, you can create an adjustable program ... 詳細表示

    • No：17646
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/04/08 11:18

  • Tool selection for thread mills (PT, ...

    OSG's program creation tool for thread mills "ThreadPro" can be used to create everything from tool selection to programming. It greatly reduces the time and... 詳細表示

    • No：17954
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/04/08 10:46

  • The basic packaging unit of the inser...

    Inserts for single-point holders Insert size: 2U / 3U 1 case 5 pieces Inserts for multi-point holders Insert size: 2 / 3 1 case 5 pieces Insert size:... 詳細表示

    • No：17927
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/04/08 10:49

  • How to machine tapered threads that a...

    In the instructions of the drawing, there are situations where it is difficult to process with standard Tap as follows. "The screwing length indication is e... 詳細表示

    • No：17636
    • Publication Date：2025/09/05 11:11
    • Updated Date：2026/04/09 13:46

Results:25 ,Showing: 1 - 10

TOP