What is the chamfer?

The chamfer is the name of a part of the tap, the tip of the tap is tepered. This part cuts the workpiece and processes the screw while cutting or raising i... 詳細表示

How to use the tool for removing brok...

For removing broken taps? EX-H-DRL Common name: Hard Drill Broken tap section A hard drill is a drill that breaks the core of... 詳細表示

Tap Selection Procedure: How to Choos...

Step (1) Check whether the screw you want to process is " through hole " or "blind hole", and open the relevant page of the general catalog "Tap Selection C... 詳細表示

internal thread Accuracy and Tapping...

OH accuracy means that in order to satisfy a predetermined internal thread accuracy, the accuracy of the tap can be selected according to the working conditi... 詳細表示

Difference Between American Pipe Scre...

NPTF has shallow bottom or the threads and sharp top of the threads. They crush each other and fit together, resulting in screws that do not require a seali... 詳細表示

What is an oversized tap?

What is Upper Thirds Tap? At the request of customers such as "tight when external thread is inserted", "plating on internal thread ", "strain countermeasur... 詳細表示

What is EXZ-SFT?

Based on the basic performance of the general-purpose spiral Tap (EX-SFT), this is a "general-purpose high-durability spiral Tap " with improved chipping res... 詳細表示

trapezoidal screw tap ACT <special tap>

This is a tap that can be screwed accurately and easily with trapezoidal screws, and is usually finished with a single raised tap after rough threading, or a... 詳細表示

When should I use a tapped tape for p...

The short thread type (tap product name: S-TPT) is used for screwing elbows, teas, and other items with a short thread length. Since the reference diamete... 詳細表示

Differences in tap materials (SKS and...

Both refer to the base material used for tapping. SKS is an alloy tool steel. ・HSS is called high-speed tool steel. The main difference between the two is... 詳細表示