Output of measurement results to labels is standard equipment on the OZT-2 and 3 label printers.Note that the OZT-1 is optional. 詳細表示
Tool presetter < clamping method>
The clamping method of the tool presetter OZT is only standard and it is only mounted.Optionally, there is a vacuum and a retracting clamping method. The O... 詳細表示
What are the types of light sources i...
It is an LED light source. 詳細表示
Measurement method < tool presetter>
The measuring method of the tool presetter OZT is a non-contact camera type. 詳細表示
Camera Protective Cover <Tool Presetter>
There is no camera protective cover. 詳細表示
Tool presetter < cutting edge adjustm...
The cutting edge can be adjusted with the tool presetter with the OZT-1.2.3. Please consult with our sales staff separately for the method. 詳細表示
The air pressure of the tool presetter is from 0.5 to 0.6 MPa. 詳細表示
There is a regulator that requires the tool presetter to drain the air, but for emergencies, please supply air that does not contain moisture. 詳細表示
Tool presetter < split measurement of...
If you want to see the radius precision in 10 degree divisions with the tool presetter, you can upgrade the OZT-3 with software and hardware. 詳細表示
IC chip support < tool presetter >
The tool presetter supports holders with IC chip only for the OZT-3 made by each company. Balluff, Omron, BIG, etc. 詳細表示
Results:107 ,Showing: 81 - 90