What is the guideline for selecting t...

I would like to know which pitch is suitable for the size and thickness of the workpiece. And if you deviate from it, what happens? Depending on the cutti... 詳細表示

Band saw processing problems:Causes a...

Causes of band saw weld fracture If a band saw weld fractures, the following are possible causes: When the weld fractures linearly Cause 1: If the blade i... 詳細表示

The Power Clamp Nano is horizontal, b...

Since it is horizontal type, there is no risk of the removed tool falling. Also, if you want to shorten the overhang length , it has the advantage of being e... 詳細表示

How should I choose between “Cool Jet...

To ensure reliable coolant supply to the cutting edge, we recommend using “Cool Flash” for operations at speeds above 10,000 min⁻¹. For lower speeds, “Cool ... 詳細表示

How do you clamp the Tool Presetter OZT?

The standard method is simply placing it. As options, vacuum clamping and pull-in clamping are available. Please note that the OZT-1 model does not support... 詳細表示

Air drain < tool presetter>

There is a regulator that requires the tool presetter to drain the air, but for emergencies, please supply air that does not contain moisture. 詳細表示

Tool presetter < split measurement of...

If you want to see the radius precision in 10 degree divisions with the tool presetter, you can upgrade the OZT-3 with software and hardware. 詳細表示

How can I get a quote for HAIMER prod...

For a quote for the following HAIMER products, please contact the OSG sales office through a trading company. < shrink fit machine Power Clamp> < ... 詳細表示

What is your day-to-day proofreading ...

It can be calibrated by measuring something that is accurate, such as a block gauge. 詳細表示

What is the difference between Synchr...

There are two types of SynchroMaster collets: GH type and GHC type, and there are differences in the corresponding refueling methods for each. Please use it ... 詳細表示