I don't know the length or shape of t...

Depending on the machine you are using, you will know the size of the band saw to be installed. Your machine → Select size = (length) × (width) × (thickness... 詳細表示

What is the guideline for selecting t...

I would like to know which pitch is suitable for the size and thickness of the workpiece. And if you deviate from it, what happens? Depending on the cutti... 詳細表示

I would like a catalog of band saws f...

Testimonials... If you weld it in-house, it will break immediately. Welding takes a long time Welding work is dangerous If even one of them applies... "... 詳細表示

Why can the Power Clamp shrink-fit sy...

Because the material of HSS tools is similar to that of shrink-fit holders, their thermal expansion rates are close. Traditionally, when removing the tool, ... 詳細表示

Does the tool presetter support hold...

The tool presetter supports holders with IC chip only for the OZT-3 made by each company. Balluff, Omron, BIG, etc. 詳細表示

Pneumatic < Tool Presetter >

The air pressure of the tool presetter is from 0.5 to 0.6 MPa. 詳細表示

What is a Tool Presetter?

A cutting tool rotates at very high speeds during machining. “Preset” means setting in advance. Presetting and measuring cutting tools before machining helps... 詳細表示

How to use Insert ・Helissert? Require...

How to use inserts? Required tools and machining procedures A thread insert is a tool in the shape of a coil that can be used to improve the strength of... 詳細表示

Can the protruding length of the tool...

There are several ways to do this. Attach the clip to the shank of the tool. Use a model with height gauge (Power Clamp Preset NG) Use a quick‑set tool to... 詳細表示

How do I order a band saw for my cont...

When ordering a band saw for a contour machine (manufactured by WIKUS in Germany) handled by OSG, please contact OSG's sales office through your usual tool t... 詳細表示