What is your day-to-day proofreading ...

It can be calibrated by measuring something that is accurate, such as a block gauge. 詳細表示

Does the tool presetter support hold...

The tool presetter supports holders with IC chip only for the OZT-3 made by each company. Balluff, Omron, BIG, etc. 詳細表示

Camera Protective Cover <Tool Presetter>

There is no camera protective cover. 詳細表示

What type of power supply does the To...

The Tool Presetter can be configured for either 100V or 200V, which must be selected before purchase. Please note that 500V is not supported. 詳細表示

Is it possible to modify existing too...

Yes, but only for our own tools. Please contact our sales department for details. 詳細表示

The tool was broken from the root dur...

Each OSG-HAIMER package comes with a broken tool extraction kit. 詳細表示

Can it be used with the 200V voltage ...

The device itself is a 400V specification, but a step-up transformer is included in each package, so it can be connected to a 200V 3-phase power supply. 詳細表示

Band saw processing problems:Causes a...

Causes of band saw weld fracture If a band saw weld fractures, the following are possible causes: When the weld fractures linearly Cause 1: If the blade i... 詳細表示

Processing Problems in Band Saws Caus...

Troubleshooting excessive vibration and noise (1) Excessive saw speed→ Adjust to an appropriate saw speed (2) Excessive wear of the saw blade Change to a b... 詳細表示

What is the guideline for selecting t...

I would like to know which pitch is suitable for the size and thickness of the workpiece. And if you deviate from it, what happens? Depending on the cutti... 詳細表示