The air pressure of the tool presetter is from 0.5 to 0.6 MPa. 詳細表示
Does the tool presetter support hold...
The tool presetter supports holders with IC chip only for the OZT-3 made by each company. Balluff, Omron, BIG, etc. 詳細表示
Why can the Power Clamp shrink-fit sy...
Because the material of HSS tools is similar to that of shrink-fit holders, their thermal expansion rates are close. Traditionally, when removing the tool, ... 詳細表示
I would like a catalog of band saws f...
Testimonials... If you weld it in-house, it will break immediately. Welding takes a long time Welding work is dangerous If even one of them applies... "... 詳細表示
What is the guideline for selecting t...
I would like to know which pitch is suitable for the size and thickness of the workpiece. And if you deviate from it, what happens? Depending on the cutti... 詳細表示
I don't know the length or shape of t...
Depending on the machine you are using, you will know the size of the band saw to be installed. Your machine → Select size = (length) × (width) × (thickness... 詳細表示
The Power Clamp Nano is horizontal, b...
Since it is horizontal type, there is no risk of the removed tool falling. Also, if you want to shorten the overhang length , it has the advantage of being e... 詳細表示
Is it possible to modify existing too...
Yes, but only for our own tools. Please contact our sales department for details. 詳細表示
Disadvantages of camera type <tool pr...
Dislikes light. Do not allow direct exposure to sunlight, spotlights, etc. 詳細表示
Are there any tools that can process ...
We offer PCD tools for machining hard and brittle materials. High-efficiency machining tools for hard and brittle materials In general, these materia... 詳細表示
Results:106 ,Showing: 31 - 40