There is a regulator that requires the tool presetter to drain the air, but for emergencies, please supply air that does not contain moisture. 詳細表示
How do you clamp the Tool Presetter OZT?
The standard method is simply placing it. As options, vacuum clamping and pull-in clamping are available. Please note that the OZT-1 model does not support... 詳細表示
How should I choose between “Cool Jet...
To ensure reliable coolant supply to the cutting edge, we recommend using “Cool Flash” for operations at speeds above 10,000 min⁻¹. For lower speeds, “Cool ... 詳細表示
The Power Clamp Nano is horizontal, b...
Since it is horizontal type, there is no risk of the removed tool falling. Also, if you want to shorten the overhang length , it has the advantage of being e... 詳細表示
Band saw processing problems:Causes a...
Causes of band saw weld fracture If a band saw weld fractures, the following are possible causes: When the weld fractures linearly Cause 1: If the blade i... 詳細表示
What is the guideline for selecting t...
I would like to know which pitch is suitable for the size and thickness of the workpiece. And if you deviate from it, what happens? Depending on the cutti... 詳細表示
What is a Portable Band Saw? < Portab...
It is a useful tool for processing pipes and tubing used for gas and water, as well as for cutting canning and lightweight materials. A machine that can be ... 詳細表示
When using an adjustable round dies, the pitch diameter is adjusted by turning the adjustment screw. At the time of shipment, it is adjusted near the center... 詳細表示
What is SynchroMaster? 【SynchroMaster】
The SynchroMaster is a dedicated Tap holder for machines with a synchronous feed mechanism. It is especially recommended for high-rigidity, high-precision... 詳細表示
What is the probe tip made of? < 3D s...
What is the probe tip made of? < 3D sensor > It is made of steel. 詳細表示
Results:106 ,Showing: 31 - 40