The air pressure of the tool presetter is from 0.5 to 0.6 MPa. 詳細表示
Tool presetter < cutting edge adjustm...
The cutting edge can be adjusted with the tool presetter with the OZT-1.2.3. Please consult with our sales staff separately for the method. 詳細表示
Camera Protective Cover <Tool Presetter>
There is no camera protective cover. 詳細表示
Measurement method < tool presetter>
The measuring method of the tool presetter OZT is a non-contact camera type. 詳細表示
What are the types of light sources i...
It is an LED light source. 詳細表示
Tool presetter < clamping method>
The clamping method of the tool presetter OZT is only standard and it is only mounted.Optionally, there is a vacuum and a retracting clamping method. The O... 詳細表示
Output of measurement results to labels is standard equipment on the OZT-2 and 3 label printers.Note that the OZT-1 is optional. 詳細表示
Specify colors < tool presetter>
Specifying the color of the exterior surface is not supported. 詳細表示
Vacuum clamp strength <tool presetter>
The strength of the vacuum clamp is the air pressure to the extent that it is pull out by the power of a human hand. 詳細表示
Compatible Holders <Tool Presetters>
The tool presetter supports the following holder formats: BT30, 40, 50, HSK40 and 63. In addition, lathe holders are also available. Please contact your sa... 詳細表示
Results:107 ,Showing: 21 - 30