The size and pitch of the thread I wa...

The size and pitch of the thread I want to machine are not displayed. If the thread type is M (meter) and you cannot select the size and pitch of the thre... 詳細表示

A thread mill with an exchangeable cu...

Make sure that the insert is not upside down. For tapered screws for pipes, there is a tapered on the insert side. Therefore, if the insert is installed on... 詳細表示

How to machine tapered threads that a...

In the instructions of the drawing, there are situations where it is difficult to process with standard Tap as follows. "The screwing length indication is e... 詳細表示

When machining tapered threads for pi...

When machining tapered threads for pipes with a thread mill, can the tools be shared with external thread internal threads? For pipe screws of the same type... 詳細表示

Are there any solid type (non- chip i...

All solid types such as AT-1 and WX-PNC are for internal thread machining. chip There is an interchangeable type for external thread machining chip . P... 詳細表示

How do you create a machining program...

How do you create a machining program for a thread mill? What is ThreadPro? Unlike taps with simple movements, thread mills require a helical machining pr... 詳細表示

【ThreadPro】User's Manual (Japanese an...

【ThreadPro】User's Manual (Japanese and English) You can refer to the manual of ThreadPro from the link below. ・ ThreadPro User Manual (Japanese) ・... 詳細表示

What is single feed and multi-feed? W...

Single feed is a pass type that threads one pitch in one lap, and is selected when the high quality of the screw is emphasized and the high hardness is supp... 詳細表示

The basic packaging unit of the inser...

The basic packaging unit of the insert<thread mill=""></thread> Inserts for single-point holders Insert size: 2U / 3U 1 case 5 pieces Inse... 詳細表示

I want the movement of the thread mil...

When using ThreadPro, an NC program creation tool for thread mills, you can do the following. In the case of right-hand thread... For right-handed (right... 詳細表示