When plating a internal thread , wha...
The amount of tap oversize required for the plating process is calculated from the plating coating thickness . When it is considered that the diameter of ... 詳細表示
What is a screw in MT6×0.75 grease ni...
MT6×0.75 screws and grease nipples are external thread standard. (JIS B 1575) external thread is 1/16 taper, but internal thread is a parallel thread and can... 詳細表示
Difference Between UNF and UNJF Pilot...
The pilot holes of the taps of the 467UNF and UNJF threads are different. The UNJF for aerospace applications has a larger minor diameter (pilot hole). 詳細表示
BA thread refers to the type of thread called BA in the British Standard BS, and the thread angle is 47.5 degrees. For example, if size is "2BA", then 2 r... 詳細表示
Cutting conditions calculation method...
Cutting conditions of tapered taps for pipes Calculation method PT (Rc) The following formula is used to calculate the cutting conditions in the same way as... 詳細表示
Internal thread accuracy and tap accu...
Internal thread accuracy and tap accuracy ( forming tap :RH accuracy) RH accuracy is the accuracy of forming tap . The forming tap series (New Roll Tap, Hi... 詳細表示
Results:76 ,Showing: 71 - 76