What is the difference between UNC an...
The F in UNF stands for fine pitch. On the other hand, the C in UNC stands for coarse pitch . For example: 5/8-11 UNC (11 peaks between 1 inch) 5/8-18 UNF ... 詳細表示
What is a trapezoidal thread? Tr TM T...
A trapezoidal thread is a thread with a trapezoidal cross‑section, characterized by a wide crest and root. OSG currently provides taps and gauges for trapez... 詳細表示
What is an NPSM screw? ANSI is a combination of external thread , internal thread and parallel threads with a relatively precise fit in the machine coup... 詳細表示
PT Thread Taper Angle – What is the s...
PT threads have a taper of 1/16, which corresponds to an included angle of 3°34′47″. The slope angle on one side is half of that taper (0.5/16), which is 1°... 詳細表示
Can Rp and PS Threads Share Tools?
There are two types of parallel internal pipe threads: Rp specified in the current JIS and PS specified in the former JIS. Tools such as taps can be shared.... 詳細表示
Calculating pitch from threads per inch
Since the value represents the number of threads within 1 inch (= 25.4 mm), the pitch in millimeters can be calculated by dividing 25.4 by the number of thre... 詳細表示
W (whitworth) and U (unified) threads
W (whitworth) threads have a thread angle of 55°, and U (unified) threads have a thread angle of 60°, so it is not recommended to fit them together. 詳細表示
Why is the pitch diameter of the scre...
In order for the external thread and internal thread to fit together, the following must be met: Internal thread is greater than external thread Here is a ... 詳細表示
How to refer to JIS standards? I want...
In order to refer to JIS standards, it is common to refer mainly to the JIS Handbook. It can also be viewed at libraries. Standards can be viewed via the ... 詳細表示
OSG Screws thread gauge Lineup - Add...
・ Please refer to the "Screw thread Gauge Inventory List" in the catalog. Thread limit gauge long neck type LG ・ Class 2 (former JIS) M2×0.4 ~ M12×1.... 詳細表示
Results:49 ,Showing: 11 - 20