Results:9 ,Showing: 1 - 9
What is the PD Series of Indexable Dr...
PD is a high-efficiency indexable drill with oil holes that pursues chip discharge. (Indexable: chip interchangeable, meaning throwaway) The high chip evac... 詳細表示
How many corners can I use for insert...
The inserts of PD drills (P2D, P3D, P4D, P5D) can be used in 4 corners, and the center cutting edge and peripheral cutting edge are the same chip , so it is ... 詳細表示
This is a drill with a flat tip, and the ADF and ADFO series are applicable. A flat tip shape is one in which the point angle of the drill is 180 degrees an... 詳細表示
What is a drill with oil holes? inte...
What is a drill with oil holes? internal coolant supply ？ A drill with an oil hole is a drill that has a hole (= oil hole) through the inside of the drill ... 詳細表示
A center drill is a tool for machining center holes, which is required when a tailstock mounted on a tailstock is used mainly on a lathe to support the c... 詳細表示
Drilling holes in titanium materials ...
It is not possible to select a suitable tool based on the information of titanium material alone. There are titanium materials with different properti... 詳細表示
What is a breakage Tap removal drill?...
What is a breakage Tap removal drill? Size selection and processing conditions Breakage Tap As a drill for removal, there is an EX-H-DRL (commonly known as ... 詳細表示
What is the difference between a thre...
2-Flute drills have good chip removal properties and are suitable for deep hole drilling and soft materials. 3-Flute drills are characterized by their high ... 詳細表示
Drill selection procedure How to choo...
Step (1) Check how many times the depth of the hole to be processed is the diameter If the drill diameter (D) is 10 mm and the depth is 30 mm Calculate 30÷... 詳細表示
Results:9 ,Showing: 1 - 9